NEW Building Codes and NDS Values!

2012 International Building Code (IBC) Standard References in the 2012 National Design Specification (NDS)

14th edition of the AISC (360-10), and the American Concrete Institute (ACI) 318-11.

Southern Pine Values


NEW Modules!

Multi-Span Combination Roof and Floor Beam Module

This module will help you design those beams where you have multi-spans and/or cantilevers involving combined roof and floor loads. It will also include the option of adding a point load on any of the spans.



Enhanced Hip Beam Module

Many of our customers are unaware of the hip beam design feature in StruCalc. We have added this module to increase the flexibility on the types of loads you can design in hip beams. 



NEW DESIGN CAPABILITY!

Uniformly Loaded Floor Beam Module, Roof Beam Module, Combination Roof and Floor Beam Module.

One NEW Point Load per Module



Enhanced Multi-Loaded Multi-Span Beam Module

NEW Interface!

Including a check box to quickly switch default input boxes for load duration factors and deflection limits.



Floor Joist Module

The option to design for glued and screwed plywood option for I-joists. Reaction support loads (in pounds per linear foot) similar to what is available in the roof rafter module at the present time.


Roof Rafter Module

Adding the ability to accommodate lateral (wind) on rafters. Also included are a scaled profile of the rafter and its imposed loads.


Column Module

NEW Embedded Post design that allows design of a ground embedded pier to resist overturning loads.




Collar Tie Module

Included provisions to design a point load at the peak of a collar tie assembly.


Footing Module

Added a ground level footing with an embedded post to resist overturning loads.